SECTION 1 - IDENTIFICATION
Product Identifier: QUICK CLEAN
Recommended Use: Stripping Paint Emergency Phone: (613) 123-4567 Supplier’s Name: Acme Paint Company Address: 123 Memory Lane, Ottawa, ON T6A 3Y5 Product Use: Paint Stripper
|Prepared By:||Acme Paint Technical|
|Preparation Date:||April 01, 2015|
SECTION 2 - HAZARDS IDENTIFICATION
DANGER: Poison. May be fatal or cause blindness if swallowed. Eye and skin irritant. Vapor Harmful. Use only with adequate ventilation to prevent buildup of vapors.
Effects to acute exposure to product: Methylene Chloride has been known to cause central nervous system damage, depression, blurred vision, blindness and cancer.
Effects to chronic exposure to product: Methylene Chloride has been known to cause liver damage.
SECTION 3 - COMPOSITION / INFORMATION ON INGREDIENTS
|Hazardous Ingredient||%||CAS Number||LD 50 of Ingredient (specify route, apecies)||LC 50 of Ingredient (specify route, species)|
|METHYLENE CHLORIDE||39||67-56-1||5628 MG/KG (oral, rat)||83200 PPM (vapour, rat)|
SECTION 4 – FIRST-AID MEASURES
Inhalation: Remove to fresh air. Get medical help if there is any breathing difficulty.
Ingestion: If swallowed, induce vomiting. If conscious & alert, give 2 glasses of water. Seek medical attention immediately.
Skin contact: Remove contaminated clothing (incl. shoes) and wash before reuse. Flush with large amounts of soap and water. If irritation persists, seek medical attention.
Eye Contact: Flush eyes with large amounts of lukewarm water for 20 minutes, while holding eyelids open or until irritation subsides. If irritation persists, seek medical attention.
SECTION 5 – FIRE-FIGHTING MEASURES
|Flammability:||Yes||under which conditions:||Flammable Liquid|
|Flashpoint and Method:||11°C, closed cup||Autoignition Temperature:||Not Available|
|Lower Flammable Lt (% by volume):||Not Available||Upper Flammable Lt (% by volume):||Not Available|
|Means of Extinction:||Alcohol Foam, Carbon Dioxide, Dry Chemical Powder, Polymer Foam|
|Explosion Data -Sensitivity toimpact:||No||Explosion Data -Sensitivity to StaticDischarges||No|
Hazardous Combustion Pdts: carbon monoxide, carbon dioxide, formaldehyde
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Leak & spill procedure: Wear adequate protective equipment and eliminate all ignition sources. Contain spill with absorbent material and place in a suitable covered and labeled container for disposal.
SECTION 7 - HANDLING AND STORAGE
Handling procedures equipment: Use in well ventilated area. Do not use with incompatible substances and keep away from heat and all ignition sources. Use grounded and non-sparking equipment only.
Storage requirements: Not Applicable
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls (specify such as ventilation, enclosed process): Ventilation to keep exposure below the TLV’s of the hazardous ingredients.
|Personal Protective Equipment:||Type:|
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
|Physical State:||Liquid||Odour and Appearance:||clear colourless liguid, chloroform-like odour|
|Coating VOC (gm/l):||491||Odour Threshold (ppm):||Not Available|
|Specific Gravity:||1.22||Vapour Density (air=1):||Not Available|
|Coefficient of water/oil distribution:||Not Available||Vapour Pressure (mmHg):||Not Available|
SECTION 10 - STABILITY AND REACTIVITY
|Chemical Stability:||Stable||Unstable under which conditions:||Not Available|
|Incompatibility with other substances:||Yes||If yes, which ones:||If yes,which ones: Strong Acids & Strong Oxidizing Agents|
|Reactivity & under which conditions:||Heat, ignition sources||Hazardous Decomposition Products:||Not Available|
SECTION 11 - TOXICOLOGICAL INFORMATION
Exposure Limits (value, units, by): Methylene Chloride: 200 ppm ACGIH
|Irritancy:||Not Available||Carcinogenicity:||Yes, Methylene Chloride causes cancer in laboratory rats.|
|Reproductive Toxicity:||Not Available||Synergistic Products:||Not Available|
SECTION 12 - ECOLOGICAL INFORMATION
Not a Marine Pollutant under the Transportation of Dangerous Goods Regulations
SECTION 13 - DISPOSAL CONSIDERATIONS
Waste disposal: Check with Federal, Provincial and local government regulations and requirements for disposal.
SECTION 14 - TRANSPORTATION INFORMATION
|Shipping Name||Class||UN#||Packing Group|
|Methylene Chloride||2.1||UN1912||Not Applicable|
SECTION 15 - REGULATORY INFORMATION
WHMIS: Class B, Class D1 This product has been classified in accordance with Canada’s Controlled Products Regulations and this MSDS contains all the information required by those regulations.
SECTION 16 - OTHER INFORMATION
Revision history: April 01, 2015
Necessary measures have been taken to ensure the accuracy and reliability of the information contained in this SDS, however Acme Paint Company makes no representation or warranty in connection therewith. Acme paint Company disclaims any liability or responsibility for loss or damages resulting from the use of the information contained in this SDS.